Поиск
Контакты

Введение

A company in the Food & Beverage industry was experiencing repeated bearing failures on a Pick & Place Unit Roller. Approximately 4 bearing sets were being changed annually due to the roller failing approximately every 3 months. A review by NSK showed the cause to be an ingress of water and process materials. NSK recommended replacing the standard bearings with NSK Molded-Oil units. A trial was implemented and since then commissioning failures have been significantly reduced. For approximately one year there had been no failures. The result was an improved productivity through reduced machine downtime.

 

Ключевые факты

  • Frequent bearing failure resulting in approximately 8 bearings being replaced annually
  • Significant number of man hours needed to replace failed bearings
  • Frequent machine down time leading to costly lost production
  • NSK Solution: Molded-Oil Ball Bearings
  • Productivity improvement
  • Cost saving realised

     

  • Pick & Place Unit
  • NSK Molded-Oil Deep Groove Ball Bearing

Предлагаемые решения

  • NSK Application Review determined the bearings had failed due to the absence of lubrication and ingress of water and process materials
  • Having completed the Review, NSK recommended the use of Molded-Oil Ball bearings
  • A trial using Molded-Oil Ball Bearings was implemented
  • The trial resulted in a substantial increase in bearing life and a reduction in machine down time

Особенности продукции

  • Molded-Oil provides continuous supply of lubrication oil
  • Grease-free property with no oil refilling keeps operating environments clean
  • Operating life more than twice as long as grease lubrication, in water or dustcontaminated environments
  • Contact-seal type available in standard inventory for ball bearings
  • Achieves extended maintenance-free performance as Molded-Oil provides a
  • continuous supply of lubricant; available for high speed applications
  • Available in Ball Bearing, Spherical Roller Bearing and Tapered Roller Bearing types
  • Stainless steel for corrosive environments

     

Сравнительный анализ до и после внедрения решений NSK

Перед внедрением Годовая стоимость После внедрения Годовая стоимость
Расходы на подшипники € 172 Расходы на подшипники € 501
Расходы на оплату труда € 3 240 Расходы на оплату труда € 0
Расходы на производственные потери € 38 880 Расходы на производственные потери € 0
Полная стоимость за год € 42 292 € 501

ссылка:SS-RU-2075

Согласие на обработку данных

NSK использует сторонние сервисы, которые помогают нам улучшать наш веб-сайт и показывать Вам более интересный контент. Для использования этих услуг нам необходимо Ваше согласие. Согласие может быть отозвано в любое время. Более подробную информацию можно найти здесь Ссылка на политику конфиденциальности.